Automotive Customized Auto Parts Injection Molds
Service
If your products and parts can be molded by plastic injection molding, we will find the best injection mold solution for you to achieve this goal. "Strive to satisfy customers and put customers first" is the purpose of our company since its establishment. We will help customers in the following aspects:
1.Design and development
2.Manufacturing tools
3.Prototypes
4.Manufacturing
5.Quality assurance
Let us share with you our deep experience in the field of injection molding, which is the reason why we as a company and our customers have brought huge benefits.
This is our specially built manufacturing plant equipped with advanced injection molding machinery and equipment. No matter what industry you are in, it can efficiently manufacture your parts according to your needs.
There are more than ten injection molding machines and a dust-free workshop. The workshop is guarded 24 hours a day, and employees will clean and disinfect it on time.
The employees here are not only workers, but also our friends. They have rich practical experience. They will also supervise the production process, make their own suggestions, and optimize the mold and its products.
Electrospark machining is mainly used for the processing of mold holes and cavities in mold production.
Its characteristics are as follows: There is a high voltage between the two electrodes of the spark discharge before the discharge. When the two electrodes are close, the medium between them is broken down, and spark discharge occurs immediately. With the breakdown process, the resistance between the two electrodes decreases sharply, and the voltage between the two electrodes also decreases sharply. The spark channel must be extinguished in time after a short period of time (usually 10-7-10-3s) to maintain the "cold pole" characteristics of the spark discharge (that is, the heat energy converted by the channel energy has no time to be transmitted to the depth of the electrode), so that the channel energy acts on a very small range. The effect of the channel energy can cause local corrosion of the electrode.
